• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to secondary sidebar

Four Sixty Two

food, family, and flowers

  • About Us
  • Recipes
  • The Garden
  • The Inspiration
  • The Home
  • The Travels

How-To

DIY Mason Jar Terrarium

July 18, 2017 by foursixtytwo

 

Oh houseplants, I’ve got a love/hate relationship with those guys.  I love having green in the house, but I kinda feel like a plant killer when I slip up on my watering and leaves start to crisp up.  The answer: self-watering mason jar terrariums! First of all, who doesn’t love a good mason jar project.  And second of all, self-watering indoor plants! A winner. So lets get started, here’s the ins and outs of creating happily independent greenery for your home.

Proper plant selection is the number one key to a happy terrarium.  Make sure you pair plants that have similar growing requirements.  For example, pairing succulents which thrive in drier soil with lush, humidity loving tropical plants will result in environmental discord within your terrarium.  Satisfying the growing requirements of both will be impossible.  Choose plants that require similar light and watering requirements.  Since my mason jar terrarium with have a lid and therefore higher levels of humidity, I selected plants that would thrive in that environment.

For my high humidity terrarium I chose……

Pink Nerve Plant {Fittonia verschaffeltii}

Nerve plants feature dark foliage with either bright pink or white veins.  I chose the pink for a bright punch of color in my terrarium. They thrive in humid, moderate light conditions. Perfect for an indoor terrarium.

Baby’s Tears {Soleirolia soleirolii}

Baby’s Tears are one of my favorite low growing house plants.  They require frequent watering in order to maintain their fresh, springy growth which makes them perfect for a closed lid terrarium.

MJ2 MJ3

I placed a few pebbles at the bottom of my container to help with drainage, and topped that with a few tablespoons of horticultural charcoal.  The charcoal is not necessary for a successful terrarium, however it does help to combat  odors from plant material that might start to decay in such a humid environment.  If you don’t have horticultural charcoal available, consider an open lidded terrarium, or make sure you remove any plant material that begins to decay.

I added about 2 inches of sterile potting soil on top of my charcoal/pebble mixture.  I added water to my potting soil before placing it in my container because I wanted to ensure that mmy plants would have a nice environment to transition into.  Also, starting with moisten soil means that you wont end up with excess water draining into the bottom of your container.  Although the pebbles and charcoal at the bottom of the container are meant to help with drainage, the goal is to keep your mason jar from collecting water at the bottom.  Too much water will cause the soil to be excessively wet, which will encourage root rot and bacterial growth in your container.  Gross.

MJ4 MJ6

The last step in my terrarium creation was to position my plants.  Using a wide mouthed, quart sized mason jar was helpful because I was able to position my plants with a little more ease.  Once my nerve plant and baby tears were in place I drizzled about two tablespoons of water in my container and fastened the lid.

MJ1 MJ5

Closed lid terrariums do not need frequent watering.  The humidity present due to the initial watering and already moist soil is designed to create a mini ecosystem with it’s own “rain showers” in the form of condensation.  Making sure that your terrarium is in a brightly lit location will assist with this process.  It might take a month or so to get your terrarium on a watering schedule, but start with adding roughly a tablespoon of water every two weeks, making adjustments if the soil in your container dries out more frequently.

Opening the lid and allowing the container to breathe is an important step in keeping your terrarium healthy and happy.  Leaving the lid off for a few days a month should be about right.  Also, do not fertilize your terrarium, you don’t want to encourage growth in your small container.

Adding green to your indoor space is as easy as finding a canning jar, a few houseplants, and watering twice a month.

Mason Jar Terrarium PIN

Filed Under: Container Gardening, Gardening, Home Decor, How-To

Vintage Fabric Play Food + Fabric Image Transfer

July 6, 2017 by foursixtytwo

Fabric Food Header Image

I am so excited to share this tutorial today!  Christmas is right around the corner and I’ve been working on a few homemade presents for my little 19 moth old girl.  We spend a lot of time in the kitchen together and she can play for the entire duration of our dinner prep with my measuring  cups and mixing spoons.  When I stumbled upon a wooden mini kitchen at a second hand store last month I knew it would be the perfect project to refinish and give her for Christmas.

A play kitchen can’t be complete without mini pots, pans, utensils, and of course play food!  I started searching around on the internet earlier this month and completely fell in love with all of the Melissa & Doug brand wooden fruits and veggies, I think they look classy and I’d thought they’d make a good fit with the rustic/vintage look of her kitchen.  However, I wasn’t ready to spend $25 for just a few pieces.  I looked up “diy play food” on Pinterest and found a ton of tutorials for felt food, which inspired this fabric food project.  So here we go…..

Image Fabric Transfer Supplies

 

For this project you’ll need:

  • Citrasolv.  This is an all-natural cleaning product that I found at Whole Foods.  I’ve also seen it in the cleaning section of my local grocery store.  If all else fails there’s always ordering online.
  • Vintage Food Image, you can download here. In order to transfer, you’ll need to print with a toner based printer.  Since I have an ink jet at home, I ran to a copy center and printed it there for a couple of cents.  If you want your food to be double sided, print two copies. Images courtesy of the Graphics Fairy
  • Scissors
  • Cotton balls or Q-tips
  • Spoon
  • White or cream colored fabric for transfers
  • Cotton
  • Needle and thread/sewing machine

Image Transfer Process Transfer steps

  1. Cut around each veggie/fruit and place it ink side down on the fabric
  2. Apply Citrasolv to a Q-tip or cotton ball and rub the back of the image, the picture should be easily visible once the Citrasolv is applied
  3. Grab a spoon, and using the flat side, rub the image
  4. The paper may begin to rub away and that’s OK.  The ink is transferring to the fabric below.
  5. Rub the entire image. Don’t be tempted to remove the paper to check you progress, lining the picture back up exactly where you left off can be tricky.
  6. Remove the paper and marvel and the beautiful image transfer you just completed!

Repeat this transfer method for each of the pieces.  If your’e doing a double sided veggies you’ll need two of each. And if you’re going to do all of them at once you’ll definitely need a helper.  The rubbing part of the transfer cramps up your wrist.

Food Transfer Complete

 

Next, trim around the edge of each set, making sure that there’s an inch or so between the edge of the veggie and the edge of the fabric. Next, place the inked sides together, matching up the edges of the fruit as close as possible.  Sew around the fabric, about 1/4″ from the colored veggie edge, leaving a 1″ opening.  Pull the fabric right side out through the 1″ opening and fill with fluffy cotton to your desired plush-ness.  And finally, tuck the edges of the opening into the center and sew along the opening.  Fabric Food Sewing Steps

TA-DA!!! All finished.  Now all that’s left is to wrap them and stick them under the tree.  I’m thinking I’ll add some fabric bread, muffins, and eggs to her fabric food set. Hope you enjoy the tutorial

Fabric Food Final

Filed Under: Home Decor, How-To, Sewing

Denim Whale Tutorial

July 6, 2017 by foursixtytwo

Whales-on-Books-for-final-blog-post

*****UPDATE**** If you’d like an adorable denim whale but aren’t up for making it yourself, you can buy one from my shop here**************************************************

I don’t claim to be a seamstress, in fact my sewing skills are novice at best.  But when I stumbled upon a denim whale on Pinterest the other day I couldn’t help but make a denim whale for my baby girls nursery.

The inspiration came from a whale I pinned off of this Finnish blog.  The pictures were great, but she didn’t give a pattern.  In fact she noted in her post that she draws her own pattern right on the fabric.  That wasn’t going to work for me.  I love to draw, but I also love to erase and redraw until I’ve got something just the way I like it.  The idea of erasing on denim didn’t really appeal to me.

So I drew my pattern out on notebook paper {which you can see pictured in my tutorial}  and made a few changes.  I wanted my whale to be a little more friendly, so a gave him some cartoon-ish features and made his lest anatomically correct.

The pattern isn’t perfect, not by a long shot. But I’ve used it to make two whales so far and it’s worked great for me.  The following tutorial is of the second whale I made, the dark blue guy pictured above.  I did a few variations at my little brother’s request and I ended up loving the changes.

My second whale has topstitched fins that we filled with fluff.  The first whale has floppy fins and tail, which I think suits him just fine.  Also, on the second go around I topstitched where the belly attaches to the top of the body.  This gave him a very distinguished, whale-like upper lip which I liked better than the embroidered smile I gave the light blue whale.

Remember, my pattern is free.  Feel free to use it to make whales for yourself, to give away, or go ahead and use it to make whales to sell.  However, please do not claim the pattern itself as your own or sell it in any way.  Also, if you repost this idea on your own blog please link it back to my blog and the original pattern.  Enjoy!

 

The All My Friends are Flowers Denim Whale Tutorial
First, download the pattern HERE.
It’s five separate PNG files that should print on standard 8″ x 11.5″ printer paper.  Because it’s printer friendly some taping of the pieces is required. Instructions are given on each sheet describing how they should be put together.
Next, find an old pair of jeans that you don’t mind cutting apart.  I’m a little sentimental about jeans.  My favorite pair bit the dust this summer when the butt tore wide open on a hike where I was chaperoning a bunch of my high school students.  Yeah, it was bad.  They’d been sitting in my drawer since August because I couldn’t bear to part  with them.  Well now I don’t have to! They were washed and turned into a stuffed animal for my soon-to-be-born baby girl.

Filed Under: How-To, Sewing, The Home

Primary Sidebar

We are Shanon, Lacey, and Kate.  This blog combines our love of cooking, gardening, and typography.  It’s a place where we share and document our passions.

Secondary Sidebar

  • The Inspiration
  • Typography
  • Printables
  • The Greenhouse
  • Sewing
  • The Garden
  • Graphics
  • Landscape Design
  • Home Decor
  • Container Gardening
  • Gardening
  • The Travels

Copyright © 2025 · Foodie Pro & The Genesis Framework